ROLLING DISPLAY/DISPLAY WITH GSM INTERFACE FOR FLASH NEWS & TRAFFIC CONTROL

This is most effective attractive and silent medium for advertisement of your products & servises. This display can be used in shops , offices , commercial establishments to display various information , greetings , messages , achievements etc. as and when required. This display is very easy to program and has a 50000 character memory . You can program the information and recall the only desired information as and when required.

Display size: 1'' x 14'' to 9.5" x 160")
Colour : red or green or yellow
Salient features:
* Input 120 v to 250v
* Clock and date diplay facility
* Memory 200 messages each of 250 characters
* Message entry by keyboard or computer or mobile or GSM modem
* Pc based software for 98/2000/xp
* Battery backup facility for memory
* Sturdy metalic box with wall mounting /hanging facility
* Super bright diffused wide angle led blocks
* Attractive software effects
* Selective message display facility
* Light weight, easy to install and have a very low consumption

Electronic Display with GSM interface for Traffic Management

Operation:
The displays will be installed at prominent locations around 500 meters before the prominent squares , and busy traffic areas. Normally the displays can be used to display Time ,Date ,Social messages and Advertisements. In case if there is traffic jam or road block the control room will transmit a message about the situation on the display just before the area . As this message is displayed on the board public will know the situation ahed and can then take diversion.

Electronic Display with GSM interface for Flash News

Specifications for Electronic Display with GSM interface for Flash News
* Led panel single sided for information display outdoor application
* Size 6" x 40" · Colour red using 5 mm bright discrete diffused Leds
* Language English and Devnagari
* Battery backup for memory
* A GSM modem will be connected to the Display. Pc will also have a GSM modem . PC will send SMS to Display.
* Memory 200 messages each of 250 characters.
* Supply i/p 230 v variation 10%
* Sturdy powder coated ms box .
* PC will have a software to program and store messages.

The selected message will then be sent to the modem which will be connected to the PC. The modem will then transmit the message to the modem connected to the display . This modem then will transmit the message to the display and the message will appear on the display. The message will be accompanied with a code ,so that message from any other device will be ignored. Along with the message a command will be sent so that the message will be displayed in the selected manner (effect). It will be possible to send a command to the display for erasing all or selective messages and also to display all or selective messages. When the display receives message it will send an acknowledgement to the PC, so that the operator will know that the display has received the message.

Operation :
The displays will be installed at prominent locations and public places. Normally the displays can be used to display Time ,Date ,Social messages and Advertisements. In case if there is Flash News the control room will transmit the message to the display . As this message is displayed on the board public will get the information immediately.